Thermaltake Pacific G1/4 90 Degree Adapter – Green (2-Pack Fittings)
The Pacific Series Adapter fittings are designed for
advanced custom water
cooling configurations. The adapter fitting rotates 360-degrees, and consists of two sealed
O-rings with a
side printed Tt logo, allowing users to redirect the fittings at a 90 degree angle for
easier tube routing.
Thermaltake fittings provide a complete solution for DIY enthusiasts and PC builders by
giving users ideal
mounting, advanced fitment options.
High-Flow and Leak-free Design
Made in Taiwan, the fittings allow proper connection to G1/4” ports, securing properly to all cooling components with G1/4” fitment. The 360-degree revolvable design which incorporates high standard O-rings can sustain high liquid pressure and flow, allowing easier tube routing, and working around obstacles in the system.
Multiple-Color Selections
Thermaltake Pacific Series components not only creates an
aesthetically
pleasing liquid cooling system but also delivers extraordinary performance during operation.
The adapters are
available in multiple-color finishes with a variety of selections or match with different
colors of fittings
to create your very own themes.
TT Premium
To continue achieving the corporate mission
of
delivering
the perfect user
experience, Thermaltake developed “TT Premium” with the essence of combining
supreme
quality products with a
new logo design. TT Premium is far more than just a guarantee of quality. Behind
the
name, it represents the
passion in DIY, Modding and Thermaltake’s desire to be the most innovative brand
in
the
PC hardware market.
To satisfy the demand of the high-end PC users, TT Premium follows its core
values
of
Excellent Quality,
Unique Design, Diverse Combinations and Boundless Creativity to provide a
high-performance PC product for
every enthusiast.
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive
certification applied only to
products that pass the design and hardcore enthusiast standards that a true LCS
chassis should hold to. The
Tt LCS certification was created so that we at Thermaltake can indicate to all power
users which chassis
have been tested to be best compatible with extreme liquid cooling configurations,
ensuring you get the
best performance from the best features and fitment.
Cautions
Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks:
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
- Do not use tap water or distilled water as your coolant; it may harm your loop and reduce performance.
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse, and dry them to ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your water loop setup:
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing corrosion in the entire cooling system – copper, brass, nickel, aluminum, and steel.
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushes the coolant into the loop.
- DO NOT let the pump run dry; turn off the power immediately if there is no liquid entering the pump.
- Fill the reservoir to the top to prevent air from entering the pump.
- If necessary, tilt the system slightly from side to side to bleed air out of the loop.
- Place some paper towels under fittings and joining points to check for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed air out of the loop.
- Before starting, flush your system correctly to prevent any coolant or unwanted particles from sticking to your tubes, radiators, and other cooling components.
- Note that coolant might fade over time.
| P/N | CL-W052-CU00GR-A |
|---|---|
| Model | Pacific G1/4 90 Degree Adapter |
| Dimensions | 42(L) x 28.3(W) x 22(H) mm |
| Weight | 200g (2 Pack) |
| MATERIALE | Copper |
| Note | 90 Degree Adapter |
| Applicable | G 1/4 |
| Screw Thread | G 1/4 |
